01
TYPE:
STANDARD SERIES
PROFILE:
NON-FLANGE EXTRUSION
.webp)
Non-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
02
TYPE:
STANDARD SERIES
PROFILE:
SINGLE-FLANGE EXTRUSION
.webp)
Single-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
03
TYPE:
STANDARD SERIES
PROFILE:
DOUBLE-FLANGE EXTRUSION
.webp)
Double-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
04
TYPE:
STANDARD COVER PLATES
PROFILE:
65MM / 95MM
Standard series cover plates available in 65MM or 95MM. Each cover plate is available in 12' or 24' continuous lengths.
05
TYPE:
STANDARD END CAPS
PROFILE:
4" / 5"
Standard series end caps for 4" and 5" profiles. Used to support profile rigidity and eliminate visual backfill on sides.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
.webp)
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
.webp)
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.
01
TYPE:
STANDARD SERIES
PROFILE:
NON-FLANGE EXTRUSION
Non-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
02
TYPE:
STANDARD SERIES
PROFILE:
SINGLE-FLANGE EXTRUSION
Single-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
03
TYPE:
STANDARD SERIES
PROFILE:
DOUBLE-FLANGE EXTRUSION
Double-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
04
TYPE:
STANDARD COVER PLATES
PROFILE:
65MM / 95MM
Standard series cover plates available in 65MM or 95MM. Each cover plate is available in 12' or 24' continuous lengths.
05
TYPE:
STANDARD END CAPS
PROFILE:
4" / 5"
Standard series end caps for 4" and 5" profiles. Used to support profile rigidity and eliminate visual backfill on sides.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.
Standard shade profile extrusions
Precision aluminum
Engineered from durable aluminum, shade profiles provide a sleek recessed channel for roller systems. Lightweight yet strong, they ensure a long-lasting architectural finish that blends into ceilings and walls.
Invisible integration
Profiles recess roller hardware completely, leaving only the fabric visible. This creates a seamless ceiling line with no bulky casings, trim pieces, or distractions from the architecture.
Universally compatible
Designed to work with leading motorized and manual shades, profiles adapt to nearly any window size or layout. From single windows to full elevations, they offer a consistent recessed solution.
01
TYPE:
STANDARD SERIES
PROFILE:
NON-FLANGE EXTRUSION
Non-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
02
TYPE:
STANDARD SERIES
PROFILE:
SINGLE-FLANGE EXTRUSION
Single-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
03
TYPE:
STANDARD SERIES
PROFILE:
DOUBLE-FLANGE EXTRUSION
Double-flanged extrusion available in 4" and 5" profile configurations. Each profile is available in 12' or 24' continuous lengths.
04
TYPE:
STANDARD COVER PLATES
PROFILE:
65MM / 95MM
Standard series cover plates available in 65MM or 95MM. Each cover plate is available in 12' or 24' continuous lengths.
05
TYPE:
STANDARD END CAPS
PROFILE:
4" / 5"
Standard series end caps for 4" and 5" profiles. Used to support profile rigidity and eliminate visual backfill on sides.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.