01
TYPE:
CUSTOM SERIES
PROFILE:
ANY FLANGE CONFIGURATION
Custom profiles in any dimension required for the project. Dual rollers, blackout, etc. Any combination of flanges (NN, UN, NS, SS).
02
TYPE:
SIDE CHANNEL
PROFILE:
DOUBLE-FLANGE CONFIGURATION
Side channels enable full blackout surround installations - removing the need for surface mounted channels.
03
TYPE:
WALL MOUNT AND COVER
PROFILE:
ANY FLANGE CONFIGURATION
Wall mount systems are available in any flange configuration required. Typically flat-back or mud-in flange application for existing pocket.
04
TYPE:
CUSTOM COVER PLATES
PROFILE:
65MM / 75MM / 85MM / 95MM / 125MM - ETC
Custom series cover plates come in a wide range of width options from 65MM to 200MM - depending on the profile size and requiremets.
05
TYPE:
CUSTOM END CAPS
PROFILE:
UNIVERSAL
Custom series end caps available to fit any custom profile dimensions required. Affixes with four screws on each side.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
.webp)
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
.webp)
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.
Custom shade profiles
Custom engineering
Built from precision-cut aluminum components, custom profiles are assembled to meet unique project demands. They allow for tailored dimensions, complex recessing, and specialty configurations that standard extrusions can’t address.
Architectural freedom
Custom assemblies adapt to challenging layouts and non-standard conditions. Whether the requirement is oversized spans, stepped ceilings, or integrated bottum up shades,, these systems give designers complete freedom.
Design without limits
Each assembly is crafted for strength, stability, and flawless concealment. Compatible with motorized or manual shading systems, they provide the same seamless recessed finish while solving architectural challenges.
01
TYPE:
CUSTOM SERIES
PROFILE:
ANY FLANGE CONFIGURATION
Custom profiles in any dimension required for the project. Dual rollers, blackout, etc. Any combination of flanges (NN, UN, NS, SS).
02
TYPE:
SIDE CHANNEL
PROFILE:
DOUBLE-FLANGE CONFIGURATION
Side channels enable full blackout surround installations - removing the need for surface mounted channels.
03
TYPE:
WALL MOUNT AND COVER
PROFILE:
ANY FLANGE CONFIGURATION
Wall mount systems are available in any flange configuration required. Typically flat-back or mud-in flange application for existing pocket.
04
TYPE:
CUSTOM COVER PLATES
PROFILE:
65MM / 75MM / 85MM / 95MM / 125MM - ETC
Custom series cover plates come in a wide range of width options from 65MM to 200MM - depending on the profile size and requiremets.
05
TYPE:
CUSTOM END CAPS
PROFILE:
UNIVERSAL
Custom series end caps available to fit any custom profile dimensions required. Affixes with four screws on each side.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.
01
TYPE:
CUSTOM SERIES
PROFILE:
ANY FLANGE CONFIGURATION
Custom profiles in any dimension required for the project. Dual rollers, blackout, etc. Any combination of flanges (NN, UN, NS, SS).
02
TYPE:
SIDE CHANNEL
PROFILE:
DOUBLE-FLANGE CONFIGURATION
Side channels enable full blackout surround installations - removing the need for surface mounted channels.
03
TYPE:
WALL MOUNT AND COVER
PROFILE:
ANY FLANGE CONFIGURATION
Wall mount systems are available in any flange configuration required. Typically flat-back or mud-in flange application for existing pocket.
04
TYPE:
CUSTOM COVER PLATES
PROFILE:
65MM / 75MM / 85MM / 95MM / 125MM - ETC
Custom series cover plates come in a wide range of width options from 65MM to 200MM - depending on the profile size and requiremets.
05
TYPE:
CUSTOM END CAPS
PROFILE:
UNIVERSAL
Custom series end caps available to fit any custom profile dimensions required. Affixes with four screws on each side.
06
TYPE:
UNIVERSAL HINGE CLIPS
PROFILE:
ALL
Hinge clips connect the cover plate to the profile allowing for quick integration. Cover plate hinges downward for easy access.
07
TYPE:
SPLICE PIN
PROFILE:
UNIVERSAL
Splice pins align profiles seamlessly if servicing span is longer than the length of the extrusion. One per corner (4 total per splice).
08
TYPE:
CABLE GROMMET
PROFILE:
UNIVERSAL
Cable grommet is rubberized for easy installation into side of profile. The grommet protects cables from shearing at entry point.
09
TYPE:
SPLICE PLATE
PROFILE:
UNIVERSAL
Splice plates are used to connect cover plates on edge seams to mitigate alignment deviation at the connecting points.